|
TPV waterstop, also known as TPER waterstop, made of an alloy of rubber and plastic, acts as a fluid-tight diaphragm with excellent mechanical properties and higher chemical resistance than traditional waterstops. Without plasticizer, stabilizer or fillers, the TPV waterstops will not leech out when exposed to chemical fluids as hydrophilic waterstops.
A coil of black TPV waterstop with center bulb
A coil of TPV waterstop with center bulb
Features & benefits：
Quality recycled thermoplastic elastomeric rubber materials - healthy and environmental friendly.
Excellent resistance against chemical, ozone, oils, solvents, hydrocarbon and aggressive industrial liquids, etc.
Not susceptible to ketones, esters, glycols, alcohol, and water solution of acids, salts and bases, etc.
High resistance to long term temperature changing ranging from -78°F to 275°F.
High elasticity.
Superior weather and UV resistance
Easy to butt-weld.
low tension and compression set.
Excellent dynamic fatigue resistance.
Six types of TPV waterstops prefabrications for changing directions
TPV waterstop prefabrications for changing directions
Application:
Ideal for primary and secondary containment structures.
Sewage treatment facilities.
Fueling containing areas.
Mining and refineries industries.
Structures relating to ozone.
Manure pits and elevator pits.
Retaining walls and dams.
Storage tanks and other water reservoirs.
Canals and tunnels.
Roof and floor slabs, parking decks and bridge decks.
|
